QA. How Revers Osmonics system works?

A. With our H₂RO System, the raw tap water first flows through a 5 micron SEDIMENT FILTER to remove dirt, rust and other sediment. The water then flows into a 10 micron CARBON FILTER which takes out 98% of the chlorine and organic chemicals. The water proceeds to the Automatic Shut-off (ASO). If the tank is full, all the inlet water stops there. If the tank is less than full, the water continues. The next stage of the process is the reverse osmosis membrane which will separate 70-99% of the dissolved contaminants from the water molecules. The contaminants are then washed down the drain.

1.How RO system  works

RO system usually use a sediment filter, carbon filter, membrane filter and Post  carbon filter(In-Line filter), each filter remove particular contaimants.  Please see the detial each filter from Filter Process page.

2.What RO Membrane remove?

Reverse Osmosis membrane reduces 93%-98% of dissolved minerals, salt and other contaminates from your water supply.  This is where the purification takes place

3.How Under Counter RO system works?